China Factory Automotive FAG Bearing 608 6820-6812 Deep Groove Ball Bearing with Seals or Shields
62200 62201 62202 62203 62204 62205 62206 62207 6 Deep Groove Ball Bearing — engineered for high-speed radial load applications with flexible grease or oil lubrication compatibility.
- Batch and lot traceability provided with QR verification through official brand applications.
Batch Traceability Assurance — every X&S 62200 series deep groove ball bearing ships with verifiable lot documentation to eliminate soft inner ring counterfeits.
Technical Specifications
| Parameter | Value |
|---|---|
| Designation | 62200 62201 62202 62203 62204 62205 62206 62207 6 |
| Bearing Type | Deep Groove Ball Bearing |
| Load Direction | Radial Bearing |
| Lubrication | Grease or Oil |
| Feature | High Speed |
| Specification | Standard size |
| Origin | Shandong, China |
| HS Code | 8482102000 |
Application Suitability
| Industry | Typical Applications |
|---|---|
| Automotive and Heavy Vehicle Repair | Alternator pulleys, transmission shaft supports, wheel hub assemblies |
| Electric Motors | Rotor shaft supports, cooling fan drives, stator end-shield mounts |
| Industrial Gearboxes | High-speed input shafts, intermediate gear supports, output seals |
| Material Handling | Conveyor roller idlers, drive pulley shafts, tensioner assemblies |
When Base Numbers Match but Field Performance Fails
Matching the basic designation without verifying internal clearances and seal types guarantees premature thermal binding.
Procurement engineers often source standard radial bearings assuming the base number is sufficient for direct replacement. In high-speed electric motor applications, installing a standard clearance variant where thermal expansion demands a C3 equivalent leads to internal preload, cage failure, and unplanned downtime. The X&S 62200 series deep groove ball bearing lineup requires exact alignment of operating temperatures and sealing configurations to prevent lubricant degradation [NEED_CITE: rolling bearing failure mode classification per ISO 15243].
Matching the X&S 62200 Series Deep Groove Ball Bearing to Target Duties
Selecting the correct X&S 62200 series deep groove ball bearing requires evaluating the specific radial loads and rotational speeds of the target assembly. Our technical review process cross-references the basic designation against the actual operating envelope, ensuring the selected variant handles the dynamic forces without excessive friction. This application-based selection prevents the common error of deploying standard industrial grades in demanding automotive or continuous-duty motor environments.
Navigating Thermal and Contamination Challenges
High-speed radial applications generate significant internal friction, making the choice between grease and oil lubrication critical for thermal management. Grease-lubricated variants offer maintenance-free operation but require careful selection of the grease fill volume to prevent churning losses, while oil-lubricated configurations dissipate heat more effectively in continuous high-RPM duties. Furthermore, the choice between contact rubber seals and non-contact metal shields dictates the balance between moisture exclusion and frictional heat generation [NEED_CITE: friction torque variations in sealed versus shielded deep groove ball bearings].
Decoding Standard Size Configurations
The standard size profile of these radial bearings ensures direct dimensional interchangeability across established mechanical assemblies. The deep groove raceway geometry is optimized to accommodate primarily radial loads while supporting moderate axial thrust in both directions. Depending on the specific assembly requirements, the internal clearance can be specified to compensate for shaft interference fits and operational thermal expansion. The cage design maintains rolling element spacing to minimize vibration and ensure stable operation at elevated rotational speeds.
The Hidden Costs of Specification Misalignment
Deploying a bearing that matches the base number but lacks the correct internal geometry or seal type inevitably leads to catastrophic damage. A shielded bearing installed in a washdown environment will suffer rapid corrosion, while a sealed bearing in a high-temperature gearbox will experience seal lip melting and lubricant starvation. These specification errors void equipment warranties and trigger cascading failures in adjacent components, emphasizing the need for rigorous cross-reference validation per ISO 281 life calculation standards [NEED_CITE: impact of internal clearance on bearing fatigue life per ISO 281].
Why Procurement Teams Rely on Our Technical Verification
We do not merely ship the requested base number; we verify the exact clearance, cage material, and seal configuration required for the specific application. Our authorized distribution network ensures that every X&S 62200 series deep groove ball bearing is sourced directly from verified production channels, eliminating the risk of counterfeit components with substandard metallurgy. We provide comprehensive cross-referencing to equivalent models from major global brands, ensuring continuity of supply without compromising technical integrity. Our engineering team reviews load, speed, and temperature parameters to confirm the selection before finalizing the order.
Documentation & Authenticity
- Certificate of Conformity validating the specific X&S production batch and material origin.
- Batch and lot traceability linking the physical bearing to the manufacturer’s heat treatment records.
- QR verification enabling instant authenticity checks through official brand applications on-site.
- Material test report confirming the metallurgical composition of the rings and rolling elements.
- Dimensional and running accuracy inspection report verifying standard size tolerances prior to dispatch.
Storage, Handling & Mounting
- Retain original factory packaging until mounting to protect the standard size surfaces from ambient humidity.
- Store in a climate-controlled environment to prevent condensation inside the grease-lubricated variants.
- Use clean, lint-free gloves when handling open or shielded configurations to prevent skin acid corrosion.
- Apply induction heating for cylindrical bore installations to avoid mechanical damage to the deep groove raceways.
- Verify the seal lip orientation and integrity before pressing sealed variants into the housing to prevent tearing.
Initiating the Technical Selection Process
To ensure precise specification alignment, provide the exact radial and axial loads, operating speeds, and thermal conditions of your application. Sharing the OEM equipment designation or the specific spatial constraints allows our engineering team to conduct a thorough L10 life review and confirm the optimal lubrication and sealing configuration. This technical validation guarantees that the supplied components will perform reliably under your specific operational parameters.
Frequently Asked Questions
Q: How do we align cross-reference models beyond the base designation?
A: We evaluate the exact internal clearance, cage material, and seal type required for your specific operating conditions. By analyzing the thermal expansion and contamination risks of your application, we match the functional requirements rather than just the basic number, ensuring the replacement part performs identically to the original equipment specification.
Q: What dictates the selection between grease and oil lubrication?
A: The choice depends on the operational speed and thermal dissipation requirements of the assembly. Grease is preferred for sealed, maintenance-free applications with moderate speeds, while oil lubrication is necessary for high-speed duties where rapid heat dissipation and continuous lubricant replenishment are critical to prevent thermal degradation.
Q: How is authenticity and batch traceability verified for these shipments?
A: Every shipment includes a Certificate of Conformity and batch traceability documentation. Procurement teams can scan the QR codes on the packaging using official brand applications to instantly verify the manufacturing origin, heat treatment records, and dimensional inspection data, eliminating the risk of installing counterfeit components.
Q: Which seal or shield type is optimal for automotive environments?
A: Contact rubber seals provide superior exclusion of moisture and fine particulate contaminants, making them ideal for exposed automotive applications. Non-contact metal shields offer lower friction and are better suited for high-speed, clean environments where minimizing internal heat generation is the primary operational requirement.
- Product Name
- China Factory Automotive FAG Bearing 608 6820-6812 Deep Groove Ball Bearing with Seals or Shields
- Category
- FAG Bearing
- Brand
- SKF
- Certification
- ISO 9001 · TS 16949
- Lead Time
- 7 Working Days
Our engineers will respond within 12 hours with a tailored solution.
Request QuoteGeneral Specifications
| Bearing Type | FAG Bearing |
| Brand | SKF |
| Quality Standard | ISO 9001 / TS 16949 |
| Precision Grade | P0 / P5 / P6 (custom) |
| Material | Chrome Steel / Stainless |
| Cage Material | Steel / Brass / Polyamide |
| Lubrication | Grease / Oil (specify) |
| Operating Temp. | -40°C to +200°C |
| Min. Order Qty | 1 pc (samples available) |
| Prototype Lead Time | 7 Working Days |
Performance Parameters
| Load Capacity | Contact for C0/Cr values |
| Speed Rating | Contact for ndm limit |
| Vibration Level | Z1 / Z2 / Z3 (custom) |
| Noise Level | V1 / V2 / V3 (custom) |
| Fatigue Life | L10h per ISO 281 |
| Sealing Options | Open / Z / 2Z / RS / 2RS |
Our engineering team can modify bearing dimensions, materials, seals, and clearances to meet your specific operating requirements. Submit your drawing or spec sheet for a tailored proposal.
Wind Power
Main shaft bearings, gearbox bearings, and generator bearings for onshore and offshore wind turbines.
Mining & Quarrying
Heavy-duty bearings for crushers, conveyors, and rotary equipment in extreme dust and shock-load environments.
Steel & Metallurgy
High-temperature bearings for rolling mills, continuous casting, and furnace applications.
Automotive / EV
Wheel hub bearings, transmission bearings, and e-motor bearings for passenger and commercial vehicles.
Rail Transit
Axle box bearings, traction motor bearings, and gearbox bearings meeting EN/UIC railway standards.
Precision Machinery
High-precision spindle bearings, angular contact bearings, and super-precision bearings for CNC and robotics.
Application Design
EngineeringOur engineers analyze your operating conditions -- load, speed, temperature, environment -- and select or design the optimal bearing solution to maximize service life and reduce total cost of ownership.
Custom Modification
7-Day TurnaroundNeed non-standard dimensions, special materials, or modified clearances? We can modify standard SKF bearings or manufacture fully custom solutions with a 7-day prototype turnaround.
Failure Analysis
DiagnosticsWhen bearings fail prematurely, our team conducts root-cause analysis using advanced diagnostic tools to identify the failure mode and recommend corrective action.
Predictive Maintenance
Up to 40% Less DowntimeWe deploy vibration monitoring, thermal imaging, and oil analysis programs that detect bearing deterioration early -- reducing unplanned downtime by up to 40%.
On-site Installation
Global CoverageProper installation is critical to bearing performance. Our certified technicians provide on-site installation support, alignment verification, and operator training worldwide.
Lifecycle Support
Enterprise SLAFrom initial selection through end-of-life, our dedicated account managers provide scheduled maintenance plans, re-lubrication programs, and replacement forecasting for enterprise clients.
The engineering partner advantage
Get a custom quote for
China Factory Automotive FAG Bearing 608 6820-6812 Deep Groove Ball Bearing with Seals or Shields
NDA protected · Free samples for orders > $50K · Reply within 12 hours